Lumirror S10

Features

S10 is a standard film for various industrial material applications, where excellent handling property is required.

Thickness

38, 50, 75, 100, 125, 188, 250µm

Typical Properties

Properties		Unit	#25 (92G)	#38 (152G)	#50 (200G)	#75 (300G)	#100 (400G)	#125 (500G)	#188 (750G)	#250 (10M)	Measurement method
Thickness	MMV	µm	23	38	50	75	100	125	188	250	JIS C2151
Tensile strength	MD TD	MPa	229 233	224 240	222 237	217 224	219 225	214 216	185 198	179 183	JIS C2151
Elongation at Break	MD TD	%	169 161	185 172	189 172	167 153	163 150	167 149	184 133	194 159	JIS C2151
Thermal Shrinkage (150°C×30min)	MD TD	%	1.2 0.0	1.2 0.3	1.1 0.1	1.2 0.3	1.1 0.1	1.1 0.2	0.9 0.4	1.0 0.6	JIS C2151
Breakdown Voltage		kV	7.4	10.1	12.0	14.9	17.2	19.3	24.2	27.9	JIS C2151
Volume Resistivity (20°C)		Ω/cm	6x10¹⁷	4x10¹⁷	4x10¹⁷	5x10¹⁷	4x10¹⁷	4x10¹⁷	4x10¹⁷	4x10¹⁷	JIS C2151
Dissipation Factor (20°C,1kHz)		%	0.41	0.41	0.42	0.42	0.41	0.42	0.43	0.43	JIS C2151
Coefficient of Friction	µs µd	- -	0.5 0.4	0.4 0.4	0.6 0.4	0.6 0.4	0.6 0.4	0.6 0.4	- -	- -	ASTM D1894

Application

S10, with its standard characteristics, can be used in a wide range of industrial material applications, including FPC, membrane switches, adhesive tapes, electrical insulation, and casting release.

Standards

UL746B:RTI Electrical 105(°C) Mechanical 105(°C) UL94VTM-2(#38 to #188)

Attention

1. We accept no responsibility for results obtained by the application of the information indicated and for the safety and suitability of the products, by itself or in combination with other products. Users are advised to perform their own tests to determine the safety and suitability of such product and product combinationaccording to each of its purposes.
2. Refer to our MSDS (Material Safety Data Sheet) before use.
3. The publication is not to be taken as a license to operate under, or as a recommendation to infringe any patents.